c) Add Routes for NetExtender (in our case, it should know how to get to the FTP Server). Connect the SonicWALL SSL-VPN appliance (X0 Interface) to the SonicWALL PRO 4060 (X2 in our case), and finalize the SSL-VPN configuration. a) For the XO port, setup the IP and mask. Configure the SonicWALL SSL-VPN appliance in stand-alone mode (PC connected to the X0 port of the SonicWALL SSL-VPN appliance via cross-over cable) for basic network connectivity. e) Configure the appropriate access rules. c) Change the management port numbers for HTTP/HTTPS d) Configure a port forwarding policy using the Public Server Wizard (alternatively an IP mapping policy can also be configured here). b) Configure the X2 port with an appropriate IP address ( /24 in our case) and assign it to the X2 zone. a) Create a new public zone named SSL-VPN. Configure the SonicWALL PRO 4060 (running SonicOS Enhanced firmware) so that we can connect a SonicWALL SSL-VPN appliance to it. Step 1-4 are for the administrator while Step 5 is for the remote user. 1 SSL-VPN Using SonicWALL NetExtender to Access FTP Servers Problem: Using NetExtender to access an FTP Server on the LAN segment of a SonicWALL PRO Solution: Perform the following setup steps.
